Our FLEXtec V2 construction is made to keep our boards strong, durable, and most importantly, FUN on the water. We only use the highest quality materials to ensure that every board is the créme de la créme before they’re sent out to be enjoyed by riders like you! Starting in the shaping room, each board is sanded down and shaped to the right dimensions and design. From there, it goes through many more steps where it’s glassed, reinforced, and fine tuned into the awesome shape that you’re stoked to ride! We’d go into more detail but the mystery is part of the fun! Find out more about the boards that make up the FLEXtec V2 Collection below!
AKU V2
The very FIRST surf style board that we produced was the Aku. It’s always been a fun shape that our team has looked fondly on so for 2024, we decided to give it a tweak and create the Aku V2. The Aku V2 is a speed demon that’s made for high-power slayshes and boosting above the lip of the wave. Its newly designed diamond bumped wing tail gives it optimum pivot and pop and the pulled in nose lets you carve as hard as you can without the board nose diving. Who doesn’t love that?! Add all that together with its twin fin configuration which gives you the optimal blend of maneuverability and drive and you get a super fun board that any rider can enjoy Check out more on the Aku V2 HERE and pick up your very own!
Sizes: 53”, 58”
Features:FLEXtec™ V2 Lamination, V.R.T.™ Technology, Reflex Speedrail, Epoxy Resin, FCS Fin Boxes, Texture Finish, EPS Core, Flexspine™ Carbon Stringer, & Twin Fin Surf Set
FIREBALL
Two boards in one, the Fireball is one of the more unique boards in our line up. Made with the same outline as the Matrix but with the thick core of our surf style boards, the Fireball can be ridden as either skim style or surf style! So whether you’re feeling skim or surf when you’re out on the boat, the Fireball has you covered. Either go finless or install the DT skim fin for skim style or use the 3.7” surf fins to attack the wave surf style! Not only that but the Fireball was built using our FLEXtec V2 construction so it’s lightweight and extremely strong. Airs and shuvs don’t stand a chance with this combination! Check out more on the Fireball HERE and pick up one for your quiver!
Sizes: 54”
Features:FLEXtec™ V2 Lamination, V.R.T.™ Technology, Reflex Speedrail, Epoxy Resin, FCS Fin Boxes, Texture Finish, EPS Core, Flexspine™ Carbon Stringer, & Twin Fin Surf Set or DT Skim Fin
DOCTOR
Made for ultimate stability and board control for experienced riders, the Doctor is your prescription for shredding. With its simple, wide outline and high volume, the Doctor can keep you in the wave with no problem so you can concentrate more on trying your next trick than pumping to keep up. With its quad fin set up, you can dial in your ride as you see fit and shred until you can’t anymore! The 59” version can handle weights up to 325 lbs so nobody feels left out when the Doctor is on the boat!
Sizes: 55”, 57”, & 59”
Features: FLEXtec V2 Lamination, V.R.T. Technology, Flexspine Carbon Stringer, EPS Core, Reflex Speedrail, Texture Finish, FCS Fin Boxes, Quad Fin Setup
KONG
The “king” of the big boards, the Kong is a fun shape that can be ridden by plenty of different riders. Made with our FLEXtec v2 Lamination, the Kong is built to be shredded! It has tons of volume, full nose outline, and a high performance rounded pintail which are just a few of the things that make this board so fun. It’s covered with a full deck of our V2 Techno Traction so anywhere you step on the board, you don’t have to worry about slipping off. Don’t mistake this board for some boring cruiser…it’s fast, easy to stay in the wave on, and can throw buckets with the best of them!
Sizes: 63” & 69”
Features: FLEXtec v2 Lamination, V.R.T.™ Technology, Reflex Speedrail, Epoxy Resin, FCS Fin Boxes, Texture Finish, EPS Core, Flexspine™ Carbon Stringer, Quad Fin Setup
ZEEVO
The newest addition to our Fun Surf Line, the Zeevo is a thruster built with tons of shredability. Its outline and wide midsection make it easy to stay in the wave while its pin tail makes it more maneuverable. When designing the Zeevo, the minds at Phase 5 wanted a board that had the comfortability of a longboard while being much more agile than it looks. This thruster fin setup provides plenty of push to play on the wave with ease while adding in an upturned nose to keep it from digging in while dropping down off of today’s steep boat waves. This board should be a part of every rider’s quiver to really switch it up on the water and take your riding back to what it’s all about: FUN!
Sizes: 64” & 70”
Features: FLEXtec v2 Lamination, Reflex Speedrail, Epoxy Resin, FCS Fin Boxes, Texture Finish, EPS Core, Flexspine™ Carbon Stringer, Tri Fin Setup
ZILLA V2
The ultimate weekend warrior board, the Zilla v2 is all about having a good time behind the boat. Its long outline keeps your speed up and in the pocket of the wave while the fish tail gives you a playful feel on the water. In true longboard style, we’ve outfitted it with a singular 8” surf fin for those long, drawn out bottom turns! Whether you’re hanging 5 on the wide nose or trying out doubles with a friend, the Zilla V2 can cruise with the best of them.
Sizes: 66” & 72”
Features: FLEXtec V2 Lamination, Flexspine Carbon Stringer, EPS Core, Reflex Speedrail, Texture Finish, VRT Technology, 8” Classic Longboard Fin
SHOP THE FULL COLLECTION HERE!
Leave a comment (all fields required)